Need help installing pi hole on rpi 3 B without keyboard
April 28, 2024, 14:28
Hi
<@1071178789939331253> u told me to ping u here
Yes
Okay where are you up to rn?
Ok
Got the pi booted?
?
Nvm I'll explain later
Im new to this so i dunno
I followed an online guide
Great
Flashed an sd card with
Yes
Rpi os lite 64 bit i think l
Lemme check
That's alright
Ok
The difference between lite and desktop is that you can only use commands but desktop uses gui, which means you can click and stuff. But I only give you commands anyway
Now. Plugged that into the pi?
My laptop is plugged into the pi
I dunno what u mean
?
One second
Kk
On the guide did it tell you to change any settings?
Yes
Set locale settings (it told me it means clock and time)
Set username and password
Enable ssh (use password authentication
Set host name
And did you enter your network stuff?
Thats it
?
Like WiFi password
Etc
No
Oh
reflash?
Can't rely on a guide you didn't write yourself 🤦♂️
Yea
Reflash it?
With your guide :))?
Yes and you can use my guide https://discord.com/channels/818384379197784084/1193923435789824050
With your network info
Lol ok
I will ask u if i have questions
I was kinda half joking
I didnt expect u to have a guide lol
Lmao
Yeah ran into this problem quite a bit
Ping me if anything comes up
<@1071178789939331253>
Hey
Do i enable ssh
And for the wifi i put my wifi info right
With my wifi name and password?
<@1071178789939331253>
<@1071178789939331253>
Plz help
Sorry for spam pinging
Sorry It didn't come through
I'm back
Yes
Ok
With password auth
Or public key
Being a hypocrite I forgot to mention that in my own guide 😭
Changed that
Password auth
Ok
?
????
<@1071178789939331253>
Yes
Ok
Flashing
It will take a bit cuz my laptop is shitty
Okay
That usually isn't the bottleneck
It's the sd card and SD card port that's the bottleneck here
Ok
next what do i do
So i can get ready
You would plug that into your pi
Ok
So get your pi ready with a power supply
The micro sd right
Yes
Can it be just me plugging it in a
Erm
I don't know in english
That thing in the wall
Where there is power
?
Yes
If you have a more powerful pi you would need a specific one that has more power than just a charger
But yours isn't that powerful so forget me saying "power supply"
If your interested read up on it in https://discord.com/channels/818384379197784084/1196069993331310702
You can look at the bottom of your charger and it will say "output 5v =~= 2.5a" or something similar
Dis?
Send a pic I'll highlight
Of the bottom of it
Dis?
5.1v 2.5a
Yeah that's good enough
Ok
Done flashing
Great
Yippee
Pop the sd into the pi?
Format it?
What?
Pop it into the pi
Ok
Done
Then plug the power supply in
Ok
This specifically is a power supply not charger
Erm
?
.
Ok
Buttttt
I need to tell u smth
I didn't buy those
A family member
Gave them to be
Cuz they were just laying around
And I wanted one
And
The actual charger/ whatever looks like this
Excuse my "great" photo skills
That has the correct amps
It is what came in the box yeah so that's perfect still
Ok
I wasnt sure
Cuz my family member like gave me a bundle of stuff
And told me it was only rpis one
And one rpi 4
And i checked on the mobo or whatever
And the first one was a three b
Okay I see
Ok cool
So now what
Got that in the pi?
And what is the green light doing?
It has a red light
And a green light
The red is constant
Yes
Good
The green is blinky
Is it repeating in a pattern or is it blinking randomly?
Wait
I cant put my finger on it
Its like sometimes it seems like theres a pattern and then it messes it up ig?
What does it mean? Am i just bad at seeing the pattern??
???
<@1071178789939331253> pls help
I am getting free trauma rn
It's alright
Well it should be pretty obvious
Like 3, 4, 7 or 8 blinks then a rest
If I remember them correctly
Can you record it?
I made a recording
It is sending
Okay
It is like 1min and 10 seconds ig
Oh
That's good then
Let me explain
I'll probably make a faq on this too
That green led is the "act" led, it means disk activity
Ok
So it would be blinking on startup then because you gave it nothing else to do it stops
But if that fails then it shows a blink pattern to show why it failed
Now then look in your router config and find the hostname you set
How
Help
Do i have to plug ethernet into the pi
Or into my laptop
On the back of your router it should say "router ip" like 192.168.1.254 or something, search that up in a browser in your computer
Oh wait if you have that plug that into it too
Not into your laptop
That guide was talking about local stuff
Don't need it
Ok
So ethernet into pi right
And that into your router
Ok greay
Great
Into router into the lan ports
Or tel port
Lan right
lan
Ok
And the ip that i search online?
should be on the back of the router
Yhe one on the back of the router right?
Ok
Thx
192.168.1.1 or 192.168.1.254 is my prediction
Chrome is ok?
yes
No
But close loo
Lol
oh interesting
you can say that btw
its local so i cant do nothing with it
Now i put my account
The raspberry pi one?
From sd card?
Ok but im paranoic sorry
Lol
<@1071178789939331253>
its alright
Ok
What do i put in herr
Here?
thats for your router settings
forget that its fine
Ok
okay press your logo key
So what do i put here???
Windows?
Or?
then type in "terminal" and click on the >_ looking thing
yeah its a general term for the windows key or whatever it is on mac
Ok
What do i say
Ssh?
Command promt
Prompt
type in ssh [username]@[hostname].local changing out [username] and [hostname] with what you put in the settings
Ok
Didn't work
error?
"[hostname].local" not found?
Ur saying for win 10 right?
ohh
Did i put it in correctly
?
it needs spaces
Oooohhhhh
So say again
so ssh [email protected]
Ok
Yes 😭
yeah thought so
always happens
download an app on your phone or laptop called "fing"
Where
however you download stuff
like on laptop with chrome
or on your phone with the app store
Dis?
<@1071178789939331253>
Dis right?
Scanned
yes
I dunno what the three "generic" are
and find your pis hostname
?
pihole3?
in there it should say that yeah
Oh wait
I just realized
I connected the pi to a different network i think
that makes sense
you need to be on the same network
Than my phone
Ok
Wait
My laptop is the same network as pi
Wait
we could do it that way the guide suggested for now
btw for pihole you would need to choose which network you want it for unless you set up additional arangements
Ok
I am downloading it on my laptop rn
Yippee
Sorry wrong pic
Yippee
Now what
<@1071178789939331253>
now write that ip down
and do ssh [user]@[ip] in the terminal this time
sorry for the late replu
<@1026818953617612851>
Ok
Np
Ssh like this: ssh or with spaces
like last time but instead of pihole3.local just put in the ip
192.168.1.[something]
Ok
Now what
yes
type in yes
And what is fingerprint
?
just a security measure
it will only do it the first time
Ok
like the fingerprint is used to identify the pi
And do i need to put it?
Or just yes
and if that changes or you get a new pi you would do that again so windows knows what you ssh-ing into
just type in yes
Ok
Done
great
done with ssh
now then. on to with pihole?
Ok
is this the network you have pihole in?
uh unstable connection
Yea
??
press the up arrow key and run the command again
Done
I put the password also
Look
yes
it would be invisible i know
thats standard
Yeah
Yea
Now?
Now what?
woah theyre your goin fast
Ok?
Now?
first you need to set up a static ip address because right now that one changes every now and then and your router needs to always know which one your pi is
follow this guide to do so https://discord.com/channels/818384379197784084/1193810781473607732
I dont understand the guide
Plz help
lol
Tell me exactly what command i run
Im a dummie
run these 3 and show me the output
ip a
route -n
Omfg
nmcli device show | grep 'IP4.DNS'
YEP
sorry caps
yep
?
next one
How do i do | on keyboard
What
Wait
Wait*
you can just copy and paste
I dont have discord on pc
Also u did it all in one msg
but do ctrl + shift + v to paste in the terminal btw
yeah
im on a british keyboard
Or just right click
for me its next to shift
Yea me too
Tyy
np
Doen
Done
All that
noted all the output down?
No
But have pictures
ok good
are you going to be using this ethernet connection from now on?
Yea ig
Or
Does rpi 3 have wifi without ethernet
then run sudo nmcli con show and copy the first option thats a scramble of letters next to "eth0"
yes it does but ethernet is faster which is better for pihole
wrong pic
Yea
that top one that starts with c2117
copy that for later
then adapt this and run it
sudo nmcli con mod <UUID> ipv4.addresses <Static IP>/<Subnet mask> sudo nmcli con mod <UUID> ipv4.gateway <IP to gateway> sudo nmcli con mod <UUID> ipv4.dns "<IP to DNS server>" sudo nmcli con mod <UUID> ipv4.method manual sudo nmcli con up <UUID>
UUID is the scramble of letters
oh wait
we need to do something else first almost forgot
Ok
we need to access that router
Ok
you need to get the username and password for the router config to be able to see the ip scope
?
the ip scope is the ranges of ips that your router gives out, we want the static ip to be out of this scope to not mess anything up
if your ip is the same as another device neither device will get internet
Ok
So
What??
<@1071178789939331253>
got access to the router config?
?
this
you need to get past that
How?
ask a family member the details
the password and stuff
might actually be on the back of the router
Ok
Done
On the back
good
Now what?
give me one secondo
unfortunately this varies widly from router brand to router brand
in my its in "my network" --> "ipv4 configuration" --> "server address range"
find something similar to scope, address range, ip range etc
and it should look like this
no im guessing it would be in config file
Lol
Can't you choose anything else?
I dunno what to choose
i cant really tell you, you have to search it all really
its annoyingly difficult to give you a step by step guide
so i cant
Ok sorry
Ill search
But what do i need
?
In any case, keep your hands off the password.
Press LAN at the top.
its alright dont be sorry
yes
Ok
Did it
Dhcp static ip config
Orrr
yes
choose that
Dhcp server config
Ok
uh
actuallly dont choose that
Erm ok
uhm, well since were doing it our way anyway we dont have to use the built in way
Slow down and show us what you see.
there we go thats it
start ip and end ip
in your fing output whats the highest any of the the ips reach?
the end number
because right now your scope is too big, we need to make it smaller so your static ip can fit in. but i dont want to make it too small that it kills internet to some of your devices
so as long as none of the devices ending numbers in the ip are above 199 then were fine
192.168.100.253 would be enough, the Pi only needs 1 IP...
So what do i do
fair, i was thinking to get an even and rounded number but it doesnt matter
??
.
Change 192.168.100.254 to 192.168.100.253 and save
?????
nevermind forget it we can probably take the chance
this
61 i think
yeah yours fills up normally, my router fills up randomly its annoying
anyway
do what thunder said
Ok
Done
Now?
now you go ahead with this
so UUID is the scramble of letters
for static ip you put 192.168.100.253, subnet mask is 24. and youve got the rest
Ok
havent given me the pictures for the rest
How do i get the rest???
you have pictures for them
the other two commands
No 192.168.100.254
253 ist last of range 😉
but 254 i think is the router
also thats where i was confused
No 1 ist Router
wait am i making that up <@1026818953617612851> or is 254 the router?
oop just saw
yeah sorry my mistake
thunder's right
I thought the router was 1
yeah it is
Ok
so change your static ip to 192.168.100.254
Ok
Wait
i cant
I changed the end ip to 253
And if i go to static ip config
It looks like this
And idk what MAC address to put here
it would be your pis
any time i do this in my router it doesnt work so i dont have the best of experience with this which is why i said i would do it our way
your choice, this is probably easier
but its the same as last time, we cant help you much with this because our routers are widly different
Done
with the router?
Ig?
did you set the ip with the router or commands?
???
what did you just do?
ok this is with the router
What u told me
Ok
run this in your pi sudo nmcli con up <UUID>
Done
okay now run hostname -I and show me the output
192.168.100.61 2a02:2f05:f203:6a00:8203:7cb3:fc:2ba5
that wouldnt usually include the last bit
uh this is why i dont use the router for static ips
okay you have to do it the cli way
???
sudo nmcli con mod <UUID> ipv4.addresses <Static IP>/<Subnet mask> sudo nmcli con mod <UUID> ipv4.gateway <IP to gateway> sudo nmcli con mod <UUID> ipv4.dns "<IP to DNS server>" sudo nmcli con mod <UUID> ipv4.method manual sudo nmcli con up <UUID>
Can u complete it with the things plz
All i know is that the uuid is
c2117d8f-567a-3e95-8657-e392e1929766
sure im in a leniant mood
i would usually say i dont want to spoonfood but you got me on the lucky side
Ok ty
Sorry im a lazy piece of shit
And also im new to rpis
sudo nmcli con mod c2117d8f-567a-3e95-8657-e392e1929766 ipv4.addresses 192.168.100.254/24 sudo nmcli con mod c2117d8f-567a-3e95-8657-e392e1929766 ipv4.gateway 192.168.100.1 sudo nmcli con mod c2117d8f-567a-3e95-8657-e392e1929766 ipv4.dns "192.1168.100.1" sudo nmcli con mod c2117d8f-567a-3e95-8657-e392e1929766 ipv4.method manual sudo nmcli con up c2117d8f-567a-3e95-8657-e392e1929766
wait actually whats the output of the last pic?
?
Then let's hope that changes, running a server is a lot of work. You don't set it up and forget about it, it needs regular maintenance!
??
ok
whats the output of nmcli device show | grep 'IP4.DNS'
well said which is usually why i leave this bit up to them
IP4.DNS[1]: 192.168.100.1
yah thought so
this is a server? i thought pihole is smth that blocks ads
this is ready then. just gl typing it all in
id put it in a pastebin
its both
its a server that blocks ads
Yes, and yet it is a server, a DNS server!
Aaaaaa
Ok
now run hostname -I
192.168.100.61 2a02:2f05:f203:6a00:8203:7cb3:fc:2ba5
confusing
what about ip a?
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether b8:27:eb:b4:32:de brd ff:ff:ff:ff:ff:ff
inet 192.168.100.61/24 brd 192.168.100.255 scope global dynamic noprefixroute eth0
valid_lft 258570sec preferred_lft 258570sec
inet6 2a02:2f05:f203:6a00:8203:7cb3:fc:2ba5/64 scope global noprefixroute
valid_lft forever preferred_lft forever
inet6 fe80::8f0e:6c9e:c7a6:49c6/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether b8:27:eb:e1:67:8b brd ff:ff:ff:ff:ff:ff
one lines messed up
sudo con mod up and the gateway is on the same line
i gtg cya
so these are separate
bye
i hope <@1187039958561726494> will help me at least
<@1071178789939331253> and <@1187039958561726494> please write here when u can. Thanks a lot! I am going to bed now but i will see the messages tomorrow
I can't help you with pihole. I have never set it up myself.
Ok
yes they are on different lines
Ok
I did it
I put them
Now what?
<@1071178789939331253> ?
What did hostname -I say?
wait
problem
Yes?
I'm going to have to go to school soon btw and probably won't be able to help you for the rest of the week since it's exam week
:(((((((((((((((
and what do i do?
Okay no problem that's expected kinda
Try to ssh again
so ssh and?
hostname -I
nopooo
ssh...
the rest
If that says 192.168.100.254 then you've successfully set a static IP
And we can do pihole
But unfortunately gtg rn
nooo tell me the full command plzz
figured it out
yessssssssssssssssssssssssssssssssssss
it said this but the first is correct
So now we can do pihole right?
oh shit
do i have to have a supported os on my laptop or my pi?
so i ran curl -sSL https://install.pi-hole.net | bash from the pihole website
It works i think
The installer started
oh shit
do i select eth0 or wlan0
You need to become a little more independent.
What do you think eth0 is and what is wlan0?
Etho ethernet and wlan like wireless?
Am i right <@1187039958561726494> ?
<@1187039958561726494>
Yes
so wlan for me
whats a dns provider
like who made my router or?
<@1187039958561726494> ????
Please don't keep pinging me, I'm at work!
How did you get WLAN?
In your previous screenshots you can see that your Pi is connected via LAN!
??
lan is ethernet?
Yes
so i had to pick eth0 instead of wlan0
?
?
Yes
ok
can u guide me through plz
like help me w questions
whats a dns provider
??
whats my dns provider
DNS = Domain Name Server
When you call up a website, the computer always checks itself first to see if it can find it there. If it cannot find it on its own, it sends the request to the network.
You entered the IP of your DNS provider several times yesterday! So look at your screenshots again, you'll find it there.
ok
lemme search
So its 192.1168.100.1?
Yes
but it isnt there
it says
custom?
Yes, you should have come along beforehand... If you only ever give me half information, you'll get the wrong answers!
Your Pi is supposed to serve as a DNS server in your network, but if it can't find what you've requested, it has to pass on the request. For this you need the upstream DNS.
You have to find out for yourself which one to choose! One is more secure than the other, one collects data and the other does not.
But you have to find out for yourself!
D:
can you please help me D:
i did some quick reasearch and i think i wanna choose google right? cuz this is where the web request will be forwarded if its not blacklisted right?
?????
As already mentioned, you have to decide for yourself!
And as I have already explained, requests that are not found on the Pi are forwarded there.
And please stop with the 100 question marks. As I've already told you, I'm working and don't always have time to answer!!!
ok
sorry
i need help again
whats admin web interface
?
This is the surface for setting the Pi Hole.
ooohh ok
i said yes and now it asks me dis
Yes right?
i said yes
enable query logging
Done. Thank you thunder and k9t33n for everything. If i have further questions i will ask here or in general! Thanks again!
No problem
<@1071178789939331253> can you answer these questions for me plz when u have time?
Why are some websites blocked and how do i fix that?
(Example:reddit.com)
That might be because it's on your blacklist
One second
Can i plug Ethernet/ power supply out or will it mess it up?
ok but ive whitelisted the domain and didnt work
Go to http://192.168.100.254/admin/login.php
Then check the logs
See if Reddit.com is on there and see if it's accepted it or not
I find it strange that it's blocked for you since it's not for me and you haven't added anything else on the blacklist have you?
Ive added googlead something
Yeah okay
Now you need to update your gravity
Open tools then update gravity
<@1071178789939331253> u online rn? Can u help me step by step?
ill take screenshots
look for this
then press the giant update button
Done
I updated it
but some sites
and reddit app still dont work
reddit app works
websites work ty very much <@1071178789939331253>
also if i have any questions further i can ask u right?
ty?
Yes
ty
can u help me make a pwnagotchi?
+do u wanna?
<@1071178789939331253>
No
I'm not knowledgeable in that area
ok
Plus I wouldnt help with that
do u have other ideas for rpi 3b/2b/4b?
Another project?
ok, i get why u wouldnt wanna help (i assure you that i will use it for legal purpouses like testing my network) but i understand
sure y not?
Try a self hosted vpn
sure
wanna do it togheter
togetjhetr
together
?
<@1071178789939331253> ?
not rn im trying to get windows
ok
so i can dual boot for games
but research pivpn
ok
<@1071178789939331253> ?
If your pi goes offline you wont have internet
Also run sudo poweroff before you unplug the power supply otherwise your SD card will be messed up and you'll most likely have to do everything again
okk
how do i ssh into it again?
ssh [username]@[ip]
a ok
i installed 32 bit raspbeerrry pi os on mmy pi 3
and now
i put it in psu
and it doessnt show up on fing
what do i do <@1071178789939331253>
Why have you reflashed it?
??
i did it on another one
Ohh
You put in the WiFi details?
yup
Try a ethernet cable
i dont have one
Okay
I can't help currently
I'll try later
i just had the one i used for pihole
ok sorry
It's alright
<@1071178789939331253> if i ssh into the pi hole can i do the command on their website to download it again but this time without ethernet? my family is annoyed w me cuz of that cable across the living room :))
or will it not work?
On which website??
pi hole s website
Yeah
so it will work?
Which command?
I don't get what your saying
curl -sSL https://install.pi-hole.net | bash
this
You want to just make it so your using WiFi not ethernet?
yes
Yeah you can do this is ssh but it wouldnt do anything, and you can't do this on the website
???
last time it worked
Okay well you set up the WiFi credentials in the imager before last I remember so just unplug the ethernet and it should be good
thats how i installed pi hole on my pi
Yeah but you don't need to do it
when i did the config of the pi hole it asks u wlan0 or eth0 and i picked eth0
cuz thats what thunder told me
Because of your static IP you should just be able to unplug ethernet and thats it after a reboot
ok
Ohh yeah forgot about that
Yeah run it again sorry
how do i reboot it after i unplug
????
?
I haven't used the normal installer in a good bit
Just turn it off and then plug the power supply back in
then hoow did u do it
so sudo poweroff
?
Run the curl command again and select wlan this time, sorry I forgot about that part.
Yeah
ok
can u help me if i get stuck plz
poh shit gttg
Okay I'll try but I'm about to go to school
Even if it may sound hard, you should learn more basics (computer, network, Linux)...
The Ethernet (LAN) is only the connection to the network/Internet. A program that you have downloaded and installed once does not have to be downloaded again just because you switch from LAN to WLAN.
ok, then tell me how do i switch plz
im new to this all
i just got them from a family member
my pis
Open Google and enter the following in the search box:
Pihole Chance interface
And no, I'm not going to spoon feed you!
You have to learn to find solutions on your own!
ok i get it with spoon feeding
ty
i found a reddit post
ty for ur help thunder
i will try to learn computer network linux...
also question
actually no
actually yes
cause i cant find the answer
so i go sudo poweroff
and now
how do i power it back on?
cause i plugged it in again
and now
its there on fing
with the same ip and everything
and i cant ssh into it because
ssh: connect to host 192.168.100.61 port 22: Connection timed out
Of course you can't SSH with this IP, you changed the IP...
when?
<@1187039958561726494> i thought i set the static ip for the pi to 192.168.100.61
and on fing it says that it is
192.168.100.61
We are still at the Pi that has pihole on it?
yes
the other one didnt quite work
i think it didnt connect to the internet
so i needed the ethernet cable for that one
so i wanted to switch to wlan
and i did
with a reddit post
then sudo power off
unplug
plug
and now i cant ssh into it again
<@1187039958561726494> do u have any ideas
can you please stop writing everything in single lines, it's really annoying...
And please stop pinging!
You set up the OS without WiFi, right? So you didn't fill in the WiFi part in the imager?
sorry for one line and ping
i filled it in
What exactly are you doing right now?
Without such information there will only be misunderstandings!
I filled in the wifi part in the imager.
you reinstall the OS?
no
at the beginning
i followed <@1071178789939331253> s guide
What's the point of entering the WiFi data in the imager if you don't reinstall the OS?
?
The imager writes the data to the SD card with the OS.
So if you do not reinstall the OS, the data you enter in the imager will not be transferred to the Pi...
wdym reinstall the os?
You open the imager, you select your model, you select the medium, you enter the data and let the imager do its work.
This is called installation.
However, if there is already an OS on the medium, this is called reinstalling.
Ok
So i have to reinstall my OS? Why tho?
You said yourself earlier that you enter the WiFi data in the imager...
But how should the data be transferred from the imager to the Pi when you don't reinstall the OS?
??????
Did you manage to switch the pihole to WiFi?
No
But you have entered the WiFi data in the imager, haven't you?
Yes i have
And then you pressed save and confirmed with yes?
Was the SD card in the SD card reader at that time?
yes
i did it at the beggining
Then all you have to do is disconnect the LAN cable and it should connect to the WiFi.
However, your router may not let the Pi in. Some routers have the setting not to let new devices in, even if they know the password.
By the way, you also had the DHCP IP reservation switched on, you should switch it off/remove it again.
You have already been told that pihole needs an IP outside the DHCP range. However, the reservation you have made only applies to IPs within the DHCP range. And exactly this setting can lead to problems...
Oh yes, and of course you have to set the WLAN interface in the Pi in the same way as you previously set the Ethernet interface.
I don't understand a thing, my only problem was with ssh, if i open up fing it finds the pihole perfectly but for some reason I can't ssh into the pihole anymore using my laptop.
also some random sites/games/apps are blocked by pihole i think cuz if i turn my internet off they work
If you switch off the internet, no website or app or game will work 🙄
No sorry, I can't help anymore
mobile data exists
For Games 🫣
It would be easier to deactivate or uninstall the pihole instead of leaving it running with the wrong settings...
But well, you must know
?
What exactly does your "?" refer to?
I cannot answer questions that have not been asked. I can't see or read minds either...
what must i know?
also
how do i change the settings??
In the web interface...
But I don't know what exactly.
As I said, I've never used pihole myself. But if sites, games, apps are blocked, it's because of incorrect settings!
You just have to google for yourself what and how to set it there!
Start reading the program's documentation.
https://docs.pi-hole.net/
ok sorry
It should be pi's IP/admin
thanks mr smartypants
i alr tried
We aren't gonna help you being talked to like this. This is the reason I've been avoiding this thread recently
He's gonna respond with another ?