December 31, 2023, 14:19
Camera Module
Hello I am trying to get my camera module to work but am having a problem i do seem to have the option to enable it
December 31, 2023, 11:20
Retropie gamepad not detected
I have retropie 4.8, Raspberry Pi zero 2 W, using Game hat waveshare for the gamepad
I tried to install mk_arcade_joystick drivers to get the buttons to be recognised through gpio pins
Connected via ethernet and when I tried to install it it failed and said "could not resolve host:file.retropie.org.uk" etc.
If you have any other solutions get the buttons to be recognised or know how to fix the failure of installation of the drivers I would appreciate it thank you
December 31, 2023, 02:45
How do you fix"this environment is externally managed". I tried using venv but that didn't do eanny
I'm new to all this I got a raspberry pi 4 for Christmas
December 30, 2023, 19:25
RPi4 Doesn't Boot
I got my Rpi4 and flashed my usb stick but it doesn't seem to boot at all. I tried both 2.0 and 3.0 usb ports. Doesn't work with either of them. Footage below
December 30, 2023, 18:27
Pi Pico in CLion Struggles
Hello fellow tinkerers!
I've been trying to set up CLion to work with building ELF2 an UF2 files, but I've been having a bit of struggles.
I'm trying to use the [Raspberry Pi Pico SDK]( https://github.com/raspberrypi/pico-sdk/tree/master ).
My host machine is Windows 10 and I'm using the [GNU Arm Embedded Toolchain]( https://developer.arm.com/downloads/-/gnu-rm ) as shown in the image.
cmake
cmake_minimum_required(VERSION 3.26)
# Check if SDK exists, it not then fetch it from remote git
set(PICO_SDK_FETCH_FROM_GIT ON)
# Pull in Pico SDK
include(pico_sdk_import.cmake)
project(TestProject)
# Initialise Pico SDK
pico_sdk_init()
# Main source files
add_executable(TestProject
src/main.c
)
# Add pico_stdlib library which aggregates commonly used features
target_link_libraries(TestProject pico_stdlib)
# Create map/bin/hex/uf2 file in addition to ELF.
pico_add_extra_outputs(TestProject)
My CMakeLists reloads perfectly fine and the Pico SDK is fetched into the build cmake-build-pico build directory.
I've used the blink example to test if this setup works:
c
/
Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
SPDX-License-Identifier: BSD-3-Clause
/
#include "pico/stdlib.h"
int main() {
#ifndef PICO_DEFAULT_LED_PIN
#warning blink example requires a board with a regular LED
#else
const uint LED_PIN = PICO_DEFAULT_LED_PIN;
gpio_init(LED_PIN);
gpio_set_dir(LED_PIN, GPIO_OUT);
while (true) {
gpio_put(LED_PIN, 1);
sleep_ms(250);
gpio_put(LED_PIN, 0);
sleep_ms(250);
}
#endif
}
When hovering over the import I get a syntax error "'pico/stdlib.h' file not found".
When attempting to build I get the following:
====================[ Build | TestProject | Pico ]================================ C:\Users\Marcel\AppData\Local\JetBrains\Toolbox\apps\CLion\ch-0\232.9921.42\bin\cmake\win\x64\bin\cmake.exe --build C:\Users\Marcel\CLionProjects\TestProject\cmake-build-pico --target TestProject -j 10 [1/51] Performing configure step for 'ELF2UF2Build' FAILED: elf2uf2/src/ELF2UF2Build-stamp/ELF2UF2Build-configure C:/Users/Marcel/CLionProjects/TestProject/cmake-build-pico/elf2uf2/src/ELF2UF2Build-stamp/ELF2UF2Build-configure cmd.exe /C "cd /D C:\Users\Marcel\CLionProjects\TestProject\cmake-build-pico\elf2uf2 && C:\Users\Marcel\AppData\Local\JetBrains\Toolbox\apps\CLion\ch-0\232.9921.42\bin\cmake\win\x64\bin\cmake.exe -DCMAKE_MAKE_PROGRAM:FILEPATH=C:/Users/Marcel/AppData/Local/JetBrains/Toolbox/apps/CLion/ch-0/232.9921.42/bin/ninja/win/x64/ninja.exe -GNinja -S C:/Users/Marcel/CLionProjects/TestProject/cmake-build-pico/_deps/pico_sdk-src/tools/elf2uf2 -B C:/Users/Marcel/CLionProjects/TestProject/cmake-build-pico/elf2uf2 && C:\Users\Marcel\AppData\Local\JetBrains\Toolbox\apps\CLion\ch-0\232.9921.42\bin\cmake\win\x64\bin\cmake.exe -E touch C:/Users/Marcel/CLionProjects/TestProject/cmake-build-pico/elf2uf2/src/ELF2UF2Build-stamp/ELF2UF2Build-configure" -- The C compiler identification is unknown -- The CXX compiler identification is unknown CMake Error at CMakeLists.txt:2 (project): No CMAKE_C_COMPILER could be found. Tell CMake where to find the compiler by setting either the environment variable "CC" or the CMake cache entry CMAKE_C_COMPILER to the full path to the compiler, or to the compiler name if it is in the PATH. CMake Error at CMakeLists.txt:2 (project): No CMAKE_CXX_COMPILER could be found. Tell CMake where to find the compiler by setting either the environment variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the full path to the compiler, or to the compiler name if it is in the PATH. -- Configuring incomplete, errors occurred! ninja: build stopped: subcommand failed.Tracing back to the files it seems to attempt to use, things like .../cmake-build-pico/elf2uf2/src/ELF2UF2Build-stamp/ELF2UF2Build-configure cmd.exe which aren't present as shown in the 2nd image. What am I doing wrong? Any resources I can use?
December 30, 2023, 15:29
bonjour j'ai un problème sur une application
I have install a razpberry pi apps and I have install 2 apps with pi apps and now I can no longer install any application with this software
December 30, 2023, 08:04
Raspberry Pi with LCD Battery/Powerbank
What battery/powerbank do you recommend that is portable for mini projects.
December 30, 2023, 07:59
Raspberry Pi 5 on Kiosk Mode
Hello,
I bought a Raspberry Pi 5 recently to use it as a digital dashboard firstly. I want to use Dakboard and tried ways to boot the pi on Kiosk mode with my Dakboard on. Most of the tutorials were still based on the PI 4 and didnt work on the 5. Could you maybe help me?
December 30, 2023, 03:20
Raspberry Pi 4 will not display on TV
Hi there, I am fairly new to raspberry pi, and i recently got a Raspberry Pi 4 with 4 GB of ram, and i have installed the 64 bit raspbian OS. However, when i go to connect it to a tv, specifically an LG OLED TV, the TV registers the signal, but nothing is displayed. I've tried both ports, changing OS, and changing the config.txt file to have the code "hdmi_force_hotplug=1"
December 30, 2023, 02:06
How to integrate 3.5 inch LCD to Rpi 4 (Bookworm)?
The tutorials on youtube doesn't work anymore because it is now running bookworm.
December 30, 2023, 00:13
*ERROR* Async flips aren't allowed
I found that adding ,reflect_x to /boot/cmdline.txt renders errors in dmesg (/var/log/syslog). However, I need to reflect the screen. This is running DietPi Lite.
December 29, 2023, 23:32
Raspberry Pi 4 restarting at random
I have been experiencing RPi4 Restarts at random. Attached are the /var/log/syslog for a boot following the crash.
I would appreciate any guidance you can offer on how to track down the source of the restarts
December 29, 2023, 20:52
ROS
How do I install ROS on my rpi 5?
December 29, 2023, 15:38
how to disable rpi pico setup mode with pico ducky
i wanted to do pico disk on rpi but my pico when i connect it starts in setup mode and shows as a usb on my computer
the git rep i am using : https://github.com/dbisu/pico-ducky
December 29, 2023, 15:06
Minicom freezes on raspi pi zero
Always after the command sudo minicom -D /dev/ttyAMA0 -b 115200 the console freezes and i cant do something. I tried ttyS0 too but it wont work at all. I tried nearly every tutorial for uart etc. but nothing worked for me. All i want is to control a gsm modul to send/receive sms on my raspberry.
December 29, 2023, 14:02
Raspberry 4 don’t read my hard disk
I have a USB hard disk and when I plug it in every port, the LED on the disk didn’t turn on
And on WEBGUI OMV, it does not appear
A solution ?
December 29, 2023, 11:23
Looking for pi 3/4 cooling solution
hoping to find something low profile with a small fan and heatsink. needs to not cover pi mounting holes as i want to mount a hat on top.
any help is greatly appreciated!
December 29, 2023, 11:17
mini joystick pin out help
hi all, I have this joystick: https://www.adafruit.com/product/2765 and I've been trying to find the pin out diagram to no avail. does anyone happen to know which pin is which in terms of gnd, 3v and signal? I dont have the board to go with it but it "should" work without it. Thanks
December 29, 2023, 08:41
regarding Raspberry Pi 5 PSU
I bought a Raspberry pi 5, sadly it didn't arrive with an adpater, so I used a mobile charger's adapter for its power and connected it with keyboard, mouse, and a monitor but when I try to boot the raspberry, it turns on for few seconds before shutting down imeditatly. I think it the issue with PS so I bought a charger with 5V and 6A would there be any issues if I use that? because in the website the mentioned that it needs 5v and 5A power. moreover because of my location, there are no official raspberry pi 5 adapters
December 29, 2023, 07:54
Pi hole
Whenever i install pi hole on caseos it just say container pihole is unhealthy
December 29, 2023, 07:07
Taskbar/Menubar is missing
What can i do to regain the lost task bar? thank you
December 29, 2023, 00:08
Multiboot
Are there any multiboot options for pi 5. Pi 4 had berryboot/berryterminal. Are there any ways to install multiple operating systems on one sd card?
December 28, 2023, 22:57
Pi 4 not booting
I wanted to run some experiments, so I decided to turn on my Pi, only to realise it stopped booting.
The ACT (green) LED doesn't turn on. Only the red LED is on, constantly.
I've been booting off USB for a very long time. I tried reflashing the OS, and tried booting it off on another Pi 4 B+ that I had and it works perfectly there. I've been using the 64-bit raspbian lite image (if this info helps)
I'm using an official Raspberry Pi power supply, so there's no issue with power as well.
3.3V and 5V are not shorted to ground, I've tested that too.
I've tried flashing the rpi-eeprom with an SD card for nothing to happen.
It does boot randomly once every 20-30 tries of power cycle, but shuts off in less than 10-20s from booting up.
I was hoping someone would help me figure out what is wrong with my Pi 4 B+ (2GB). Thanks!
December 28, 2023, 21:37
using a pi pico to connect a wii guitar hero controller to a pc
so this is a new thing theirs tutorials online i've got one im following i just don't know a lot of the terms so would be cool if someone could help me with what connects to were (bellow is the tutorial im looking at if interested)
https://santroller.github.io/guitar-configurator/guides/wii.html
December 28, 2023, 20:42
keyboard matrix problems.
Please post text as text and formatted as pyhon code
December 28, 2023, 19:59
problem with display waveshare 12885 (FAST)
Hi,
I have a problem with screen wavshare 12885 (7"). Todays morning i was using it normally, everything was working well. Then i disconnect everything from my raspberry pi 4b 4gb to do cable managment. After 15 min i plugged everything back. I saw that my screen not displaying anything, only backlight and white stripes (as always) in first miliseconds after connecting rpi to power. I connected raspberry to normal, hdmi monitor and it was working fine.
Thanks for fast help.
December 28, 2023, 12:32
Portainer Installing/Running Correctly when built from template, manual pull issue
I have docker and portainer running on my pi, using the app template from pi hole if I deploy a container using an image everything works fine, I get a published port and can connect and access the app in question with no issues.
I've tried to manually pull one or two images, (Dashy in this case) this works fine, it's when I deploy them as a container, they run fine according to portainer but I don't get a published port listed, so can't access? Any ideas
December 28, 2023, 11:54
Separate power supplies for Raspberry Pi and motor driver board
Hi! 👋
I have a Raspberry Pi 5 and this motor driver board: https://www.waveshare.com/rpi-motor-driver-board.htm
The board is connected to a battery pack to power small motors and can supply up to 5V2A to the Pi. Because this is not sufficient for the Pi 5, I need to connect a dedicated power supply to the Pi. I want to avoid any problems that could be caused by having two power supplies connected to each other.
Would disconnecting the 5V GPIO pins (e.g. by wrapping them in electrical tape) be the best/easiest way to use this motor driver board with the Pi 5?
December 28, 2023, 09:24
IP CAM connection with Raspberry pi.
Description: Unfortunately I don't have enough information on this subject. I've been trying to connect IP Camera to raspberry pi for 3 days. Either I'm making a hardware or process error. For this reason, I couldn't make the connection. I need to connect on LAN cable. I tried from interfaces such as VLC, OMXplayer, I tried with ssh from the end unit but in vain I could not get the image. I need to transfer the live image.